12 ELEC W/H UTILITY 120V 2000W H=21.5 D=15.9
Share
Product#ASW CE-12-AS
MPN 50315040810
UPC856546006736
Description
American Standard® Point-Of-Use Electric Models - are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under counters, mop sinks, cabinets or in other confined areas.
American Standard® Electric Water Heater, Point-of-Use, Series: CE Series, 12 gal Tank, 120 VAC, 16.7 A, 2000 W, 1 ph, 3/4 in Water Connection, Immersion Heating Element, 10 AWG Wire, 9 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, Glass Lined Steel, 15-7/8 in Dia x 21-7/8 in H
American Standard® Electric Water Heater, Point-of-Use, Series: CE Series, 12 gal Tank, 120 VAC, 16.7 A, 2000 W, 1 ph, 3/4 in Water Connection, Immersion Heating Element, 10 AWG Wire, 9 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, Glass Lined Steel, 15-7/8 in Dia x 21-7/8 in H
12 ELEC W/H UTILITY 120V 2000W H=21.5 D=15.9
Share
Product#ASW CE-12-AS
MPN 50315040810
UPC856546006736
- Brand: American Standard®Amperage Rating: 16.7 AASME Yes/No: NoDimensions: 15-7/8 in Dia x 21-7/8 in HHeating Element: ImmersionMaterial: Glass Lined SteelPhase: 1 phPower Rating: 2000 WPressure Rating: 150 psiRecovery Rate: 9 gph at 90 deg F RiseSeries: CE SeriesTank Capacity: 12 galType: Point-of-UseVoltage Rating: 120 VACWater Connection: 3/4 inWire Size: 10 AWG
- Heavy gauge steel tank
- Inner tank glass-lined with Dura-Glas™ and fired at 1600 deg F for optimum protection from the effects of corrosion
- non-cfc energy saving foam insulation - reduces energy cost by maximizing heat retention
- Anode rod - to ensure longer tank life
- Immersion heating element - applies heat directly to water
- Fully adjustable thermostat control - for variable temperature control to 160 deg F
- Factory installed energy cut-off system
- Top and side water connections - on 6 to 20 Gallon Models affording choice of cold-in and hot-out connections
- Factory installed temperature/pressure relief valve
- Brass drain valve (full port ball) - designed to allow easy draining and avoid clogging
- American Standard® point-of-use electric water heraters - are certified at 300 psi test pressure and 150 psi working pressure and all tanks are 100% hydrostatically tested at the factory
- American Standard® Point-Of-Use Electric Models - are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under counters, mop sinks, cabinets or in other confined areas.
American Standard® Electric Water Heater, Point-of-Use, Series: CE Series, 12 gal Tank, 120 VAC, 16.7 A, 2000 W, 1 ph, 3/4 in Water Connection, Immersion Heating Element, 10 AWG Wire, 9 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, Glass Lined Steel, 15-7/8 in Dia x 21-7/8 in H