Product#WATS LL100XL-2.5-150
MPN 0066132
UPC098268214666
Description
This 3/4 in extra extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105000 Btu/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. It is suitable for water heaters with up to 2-1/2 in of insulation. It is ASME rated and CSA listed. The temperature relief is 210 deg F, the pressure relief range is 75 to 150 psi and the standard pressure setting is 150 psi.
WATTS® Temperature and Pressure Relief Valve, Self Closing, Series: LL100XL, 3/4 in Nominal, MNPT x FNPT, 150 psi, 210 deg F, 2-1/2 in Probe Length, Test Lever Actuator, Bronze Body, Stainless Steel Trim, 1-7/8 in W
WATTS® Temperature and Pressure Relief Valve, Self Closing, Series: LL100XL, 3/4 in Nominal, MNPT x FNPT, 150 psi, 210 deg F, 2-1/2 in Probe Length, Test Lever Actuator, Bronze Body, Stainless Steel Trim, 1-7/8 in W
- Brand: WATTS®Actuator Type: Test LeverBody Material: BronzeDimensions: 1-7/8 in WEnd Style: MNPT x FNPTNominal Size: 3/4 inPressure Rating: 150 psiProbe Length: 2-1/2 inSeries: LL100XLTemperature Rating: 210 deg FTrim Material: Stainless SteelType: Self Closing
- Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105000 Btu/hr
- Unique thermostat with special thermo-bonded coating
- Self closing safety valve for hot water heaters
- Extended inlet shank suitable for water heaters with up to 2-1/2 in insulation
- Thermostat is accurate and proven
- Exclusively designed and manufactured by WATTS®
- Stainless steel spring
- This 3/4 in extra extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105000 Btu/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. It is suitable for water heaters with up to 2-1/2 in of insulation. It is ASME rated and CSA listed. The temperature relief is 210 deg F, the pressure relief range is 75 to 150 psi and the standard pressure setting is 150 psi.
WATTS® Temperature and Pressure Relief Valve, Self Closing, Series: LL100XL, 3/4 in Nominal, MNPT x FNPT, 150 psi, 210 deg F, 2-1/2 in Probe Length, Test Lever Actuator, Bronze Body, Stainless Steel Trim, 1-7/8 in W