GAS REGULATOR 1 W/VENT LIMITER 12A39
Share
Product#MAX 325-5L-1-IN
MPN 325-5L-1
Description
Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H
GAS REGULATOR 1 W/VENT LIMITER 12A39
Share
Product#MAX 325-5L-1-IN
MPN 325-5L-1
- Body Material: AluminumDimensions: 5.3 in HEnd Style: ThreadInlet to Outlet Length: 5.9 inNominal Size: 1 inPressure Rating: 2 psiSeries: 325Temperature Rating: -40 to 205 deg FType: Lever Acting Design
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
- Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
- Minimum Regulation: Suitable for pilot flow applications
- 65 psi emergency exposure limit (inlet side only)
- 3/8 in NPT vent connection
- 4.9 in swing radius
- Maximum Individual Load: 425000 Btu/hr
- Total load of multiple appliance combined capacity: 600000 Btu/hr
- 1 to 2 psi inlet pressure
- 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
- Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H