Product#RID 66497
MPN 66497
UPC095691664976
Description
The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 11/4 in to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 in and 7/8 in sectional cable.
RIDGID® Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain, 1/2 hp, 115 VAC, 7 A, 600 rpm, 18 in L x 9-1/2 in W x 14 in H
RIDGID® Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain, 1/2 hp, 115 VAC, 7 A, 600 rpm, 18 in L x 9-1/2 in W x 14 in H
- Brand: RIDGID®Amperage Rating: 7 ADimensions: 18 in L x 9-1/2 in W x 14 in HDrain Line Capacity: 1-1/4 to 4 inHorsepower: 1/2 hpSpeed: 600 rpmTool/Kit: KitVoltage Rating: 115 VAC
- A compact machine for institutional, commercial or residential cleaning, also ideal for septic tank vacuum truck operators, small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
- Ideal for rooftop vent stacks, rear handle allows for easy transporting up ladders and onto rooftops
- Remove only two bolts to access jaw set for cleaning or replacement, removal of same bolts provides access to belt drive
- Equipped with 1/2 hp motor approved to CSA and UL standards (NRTLC)
- Simple adjustment knob allows unit to spin both 7/8 and 5/8 in dia cable, adjusts in seconds
- 7/8 in cable (C-10) cleans 2 to 4 in lines through 150 ft
- 5/8 in cable (C-7, C-8, C-9) cleans 1-1/4 to 4 in lines through 125 ft
- 115 V 60 Hz reversible motor
- The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 11/4 in to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 in and 7/8 in sectional cable.
RIDGID® Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain, 1/2 hp, 115 VAC, 7 A, 600 rpm, 18 in L x 9-1/2 in W x 14 in H