WD820 GRINDER PUMP 2HP 230V AUTO
Share
Product#ZOE 820-0011
MPN 820-0011
UPC053514068974
Description
This series of submersible pumps is designed for use in residential or commercial wastewater applications and can be used to transfer wastewater or unscreened raw sewage. Each pump features an innovative cutting mechanism allowing it to grind solids into fine particles. The uniform consistency of the discharged material lessens the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor. As with every Zoeller® pump, each one is 100% factory tested to ensure quality and reliability for years of trouble free performance.
Zoeller® The Shark® Grinder Pump, Single Directional, Series: 820, 47 gpm Maximum, Automatic, 1-1/4 in NPT Outlet, 107 ft Maximum Head, 2 hp, 230 VAC, 13.7 A, 1 ph ph, 20 ft Cord, 130 deg F, Cast Iron
Zoeller® The Shark® Grinder Pump, Single Directional, Series: 820, 47 gpm Maximum, Automatic, 1-1/4 in NPT Outlet, 107 ft Maximum Head, 2 hp, 230 VAC, 13.7 A, 1 ph ph, 20 ft Cord, 130 deg F, Cast Iron
- Brand: Zoeller®Amperage Rating: 13.7 AAutomatic/Non Automatic: AutomaticCord Type: 20 ftHorsepower: 2 hpMaterial: Cast IronMaximum Flow Rate: 47 gpmMaximum Head: 107 ftOutlet Size: 1-1/4 in NPTPhase: 1 phSeries: 820Temperature Rating: 130 deg FType: Single DirectionalVoltage Rating: 230 VAC
- Durable, heavy duty, finned cast iron construction
- Oil filled, hermetically sealed motor with class B insulation, automatic reset thermal overload protected
- Hardened stainless steel cutter and disc
- Cutters protected from abrasive solids
- Stainless steel lifting handle, screws and bolts
- Easily adapts to rail systems
- Mechanical shaft seal - carbon/ceramic
- Control panels not required
- Corrosion resistant, powder coated epoxy
- 1-1/4 in NPT vertical discharge
- Thermal overload protection
- Engineered plastic impeller
- Stainless steel cutter plate/cutter, shaft and hardware
- Capacitor start/capacitor run design
- Uniquely designed with integral control
- Legs provided for free-standing installation
- Upper and lower ball bearings running in bath of oil
- This series of submersible pumps is designed for use in residential or commercial wastewater applications and can be used to transfer wastewater or unscreened raw sewage. Each pump features an innovative cutting mechanism allowing it to grind solids into fine particles. The uniform consistency of the discharged material lessens the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor. As with every Zoeller® pump, each one is 100% factory tested to ensure quality and reliability for years of trouble free performance.
Zoeller® The Shark® Grinder Pump, Single Directional, Series: 820, 47 gpm Maximum, Automatic, 1-1/4 in NPT Outlet, 107 ft Maximum Head, 2 hp, 230 VAC, 13.7 A, 1 ph ph, 20 ft Cord, 130 deg F, Cast Iron