E165 SUB EFF PUMP 1HP CI NON-AUTO 230V 1.5 DI
Share
Product#ZOE 165-0004
MPN 165-0004
UPC053514015312
Description
Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.
Zoeller® Submersible Effluent Pump, Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum, Non-Automatic, 1-1/2 in NPT Outlet, 86-1/2 ft Maximum Head, 1/2 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions
Zoeller® Submersible Effluent Pump, Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum, Non-Automatic, 1-1/2 in NPT Outlet, 86-1/2 ft Maximum Head, 1/2 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions
E165 SUB EFF PUMP 1HP CI NON-AUTO 230V 1.5 DI
Share
Product#ZOE 165-0004
MPN 165-0004
UPC053514015312
- Brand: Zoeller®Amperage Rating: 10.2 AAutomatic/Non Automatic: Non-AutomaticBearing Type: BallCord Type: 3-Wire NeopreneDimensions: 12-3/4 in W x 19-5/16 in HFrequency Rating: 60 HzHorsepower: 1/2 hpImpeller Type: Bronze Non-Clogging VortexMaterial: Cast IronMaximum Flow Rate: 100 gpmMaximum Head: 86-1/2 ftMotor Speed: 3450 rpmOutlet Size: 1-1/2 in NPTPhase: 1 phSeries: High Head Flow-Mate 160Temperature Rating: 130 deg FType: Single SealVoltage Rating: 230 VAC
- Durable, cast iron constructed switch case, base, motor and pump housing
- Cast iron class 25 to 30 (25000X tensile strength)
- Impeller bronze class 85-5-5-5
- Corrosion resistant, powder coated epoxy
- Oil filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower ball bearings running in bath of oil
- Carbon and ceramic shaft seal
- No screens to clog
- Neoprene square ring and gasket
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Passes 3/4 in (19 mm) spherical solids
- On point - 14-3/4 in, off point - 5 in
- 100% of units are computerized tested
- Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.
Zoeller® Submersible Effluent Pump, Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum, Non-Automatic, 1-1/2 in NPT Outlet, 86-1/2 ft Maximum Head, 1/2 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions