FIXTURE OUTLET BOX 1/2 PEX x 3/8 CMPR VLV
Share
Product#HOLD HR-F-P-1
MPN HR-F-P-1
Description
HoldRite fixture outlet boxes are designed for use in commercial and residential applications and allow for installation of water supply valves during the rough-in phase. They can be installed directly to a stud via flange holes or between studs using a hyco bar, HoldRite 170, or other HoldRite galvanized bracketing. Outlet box assemblies include a supply valve with a quarter-turn handle and a 1/4 in. or 3/8 in. threaded compression connection. Can be used with copper, PEX or CPVC. Protective debris cover included. Escutcheons, valve extension, and other accessories sold separately
FIXTURE OUTLET BOX 1/2 PEX x 3/8 CMPR VLV
Share
Product#HOLD HR-F-P-1
MPN HR-F-P-1
- Brand: Holdrite®
-
- Tail pieces have near 360 degree movement for installation in any orientation.
- Copper & PEX tail pieces to extend beyond body for easy use of inlet pipe connection tools.
- White or chrome trim plate options (also have extended trim plate options & ""goof"" ring options) thread into place, no need for adhesives or fasteners.
- Chrome lock nut to match valve and allows for ""z"" axis movement to handle multiple drywall layer options and or cabinet wall installations.
- Standard drywall configurations handled out of the box (1/2 in., 5/8 in., 1/2 in. & 5/8 in., 2 x 1/2 in., 2 x 5/8 in.
- Small footprint: 2.5 in. sheetrock hole (3 in. hole size covered by goof ring plate).
- Attaches to SB1/2/3/4 brackets, 170/170-26, hyco bars or directly to studs.
- Two support let sockets & one 5/8 in. friction socket (accepts lengths of copper, PEX or CPVC) for additional support where needed.
- Protective cover is threaded so no additional tools or screws are necessary for install or removal.
- HoldRite fixture outlet boxes are designed for use in commercial and residential applications and allow for installation of water supply valves during the rough-in phase. They can be installed directly to a stud via flange holes or between studs using a hyco bar, HoldRite 170, or other HoldRite galvanized bracketing. Outlet box assemblies include a supply valve with a quarter-turn handle and a 1/4 in. or 3/8 in. threaded compression connection. Can be used with copper, PEX or CPVC. Protective debris cover included. Escutcheons, valve extension, and other accessories sold separately.