Product#WATS LF70A-T-050
MPN 0559130
UPC098268451887
Description
This 1/2 in hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater and solar applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, threaded connections, thermostat, stainless steel springs and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The temperature range is 120 to 160 deg F.
WATTS® Hot Water Extender Tempering Valve, Series: LF70A-T, 1/2 in Nominal, Thread End Style, 150 psi Pressure, 120 to 160 deg F, 2 gpm Flow Rate, Media: Water, Brass Body, Stainless Steel Trim, 2-7/16 in L x 3-7/8 in H Dimensions, Domestic/Import: Domestic
WATTS® Hot Water Extender Tempering Valve, Series: LF70A-T, 1/2 in Nominal, Thread End Style, 150 psi Pressure, 120 to 160 deg F, 2 gpm Flow Rate, Media: Water, Brass Body, Stainless Steel Trim, 2-7/16 in L x 3-7/8 in H Dimensions, Domestic/Import: Domestic
- Brand: WATTS®Body Material: BrassDimensions: 2-7/16 in L x 3-7/8 in HDomestic/Import: DomesticEnd Style: ThreadFlow Rate: 2 gpmMedia: WaterNominal Size: 1/2 inPressure Rating: 150 psiSeries: LF70A, LF70A-TTemperature Rating: 120 to 160 deg FTrim Material: Stainless Steel
- Thermostat assembly is easy to maintain, remove and replace
- Simple maintenance thermostat assembly is easily removed and replaceable as a unit
- Finger tip dial adjustment cap
- Stainless steel spring
- The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
- Dial adjustment cap
- This 1/2 in hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater and solar applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, threaded connections, thermostat, stainless steel springs and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The temperature range is 120 to 160 deg F.
WATTS® Hot Water Extender Tempering Valve, Series: LF70A-T, 1/2 in Nominal, Thread End Style, 150 psi Pressure, 120 to 160 deg F, 2 gpm Flow Rate, Media: Water, Brass Body, Stainless Steel Trim, 2-7/16 in L x 3-7/8 in H Dimensions, Domestic/Import: Domestic