SECURE-ALL COP-PLTD BRKT 2 X 20 1/2-3/4CTS 20GA
Share
Product#SIOUX 521-851
MPN 521-851
UPC739236206855
Description
Sioux Chief's SecureAll copper plated bracket shall be used where necessary to support 1/2, 3/4 or 1 in nominal copper stub outs for water supply lines. Bracket shall be stamped from heavy gauge steel then copper electro-plated and then a clear coat finish applied to reduce corrosion. Bracket shall not have any areas of exposed plain steel. Bracket design shall include extruded holes or notches for additional soldering surface. Bracket design shall also include formed stiffening ribs along top and bottom of bracket for ultimate strength and rigidity.Bracket shall feature nominal 1/2 in holes on 2 in centers, nominal 3/4 and 1 in holes on 4 in centers and nomimal 1/2 and 3/4 in notches on 2 in centers.
Sioux Chief SecureAll™ Stub Out Bracket, Series: 521-85, 25 lb, Steel, Copper Plated, 20 in L x 2-3/8 in H, Domestic
Sioux Chief SecureAll™ Stub Out Bracket, Series: 521-85, 25 lb, Steel, Copper Plated, 20 in L x 2-3/8 in H, Domestic
SECURE-ALL COP-PLTD BRKT 2 X 20 1/2-3/4CTS 20GA
Share
Product#SIOUX 521-851
MPN 521-851
UPC739236206855
- Brand: Sioux ChiefDimensions: 20 in L x 2-3/8 in HDomestic/Import: DomesticFinish: Copper PlatedLoad Capacity: 25 lbMaterial: SteelSeries: 521-85
- Patent # 7,039,965
- Reduce inventory with one bracket that feature multiple hole sizes and notches
- Stiffening ribs on top and bottom provides ultimate rigidity
- Heavy ga copper plated steel
- All hole and notches are extruded for maximum soldering surface
- Bracketing areas on 521-851 is 14 in
- Heat the tube, not the bracket
- 16 in stub bays
- Wear gloves and eye protection when handling metal hanger strap to avoid injury
- Secure bracket to studs using nail or screw (not provided)
- Clean and prepare copper stub out for soldering
- Insert copper tube into pipe hole, apply flux, heat copper tube not bracket when applying solder
- 18 ga steel
- Sioux Chief's SecureAll copper plated bracket shall be used where necessary to support 1/2, 3/4 or 1 in nominal copper stub outs for water supply lines. Bracket shall be stamped from heavy gauge steel then copper electro-plated and then a clear coat finish applied to reduce corrosion. Bracket shall not have any areas of exposed plain steel. Bracket design shall include extruded holes or notches for additional soldering surface. Bracket design shall also include formed stiffening ribs along top and bottom of bracket for ultimate strength and rigidity.Bracket shall feature nominal 1/2 in holes on 2 in centers, nominal 3/4 and 1 in holes on 4 in centers and nomimal 1/2 and 3/4 in notches on 2 in centers.
Sioux Chief SecureAll™ Stub Out Bracket, Series: 521-85, 25 lb, Steel, Copper Plated, 20 in L x 2-3/8 in H, Domestic