COP SUPPORT BRACKET 1/2COP NOTCHES 1CC
Share
Product#HOLD 110-S-1/2
MPN 110-S-1/2
UPC671119110128
Description
The HOLDRITE® #110-S-1/2 is a Copper-Bonded™ and available with 1/2 in notches on 1 in centers. This brackets mounts directly to a horizontal or vertical pipe, and is designed to position water supplies for lavatories, and other fixtures. Packaged with a self-locking 4 in stainless steel band and self-adhesive isolation felt; solder the pipe directly to the #110-S to set 4 in, 6 in and 8 in centers. Heat the pipe, not the bracket.
Holdrite® Bracket, 25 lb, 16 ga Thickness, Cold Rolled Steel, Copper-Bonded™, 9.31 in L x 2 in W
Holdrite® Bracket, 25 lb, 16 ga Thickness, Cold Rolled Steel, Copper-Bonded™, 9.31 in L x 2 in W
COP SUPPORT BRACKET 1/2COP NOTCHES 1CC
Share
Product#HOLD 110-S-1/2
MPN 110-S-1/2
UPC671119110128
- Brand: Holdrite®Dimensions: 9.31 in L x 2 in WFinish: Copper-Bonded™Load Capacity: 25 lbMaterial: Cold Rolled SteelThickness: 16 ga
- Heavy-gauge steel bracket
- For 1/2 in copper tubing on 4, 6 and 8 in centers
- Install directly to the waste/vent pipe prior to studs being erected
- Easy pre-fabrication at the shop or on the job site
- For use with pipe size 1/2 in CTS
- The HOLDRITE® #110-S-1/2 is a Copper-Bonded™ and available with 1/2 in notches on 1 in centers. This brackets mounts directly to a horizontal or vertical pipe, and is designed to position water supplies for lavatories, and other fixtures. Packaged with a self-locking 4 in stainless steel band and self-adhesive isolation felt; solder the pipe directly to the #110-S to set 4 in, 6 in and 8 in centers. Heat the pipe, not the bracket.
Holdrite® Bracket, 25 lb, 16 ga Thickness, Cold Rolled Steel, Copper-Bonded™, 9.31 in L x 2 in W