3/8 x 2-1/4 WEDGE ANCHOR ZINC JAR
Share
Product#PECO 6410J
MPN 6410J
UPC705591964785
Description
The Power-Stud+® SD1 anchor is fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance is cracked and uncracked concrete. Suitable base materials include nominal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Peco Wedge Expansion Anchor, Series: Power-Stud+® SD1, 3/8 in Diameter, 2-1/4 in Overall Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, UNC Thread, 2540 lb Shear Strength, 2685/3100 lb Tensile Strength
Peco Wedge Expansion Anchor, Series: Power-Stud+® SD1, 3/8 in Diameter, 2-1/4 in Overall Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, UNC Thread, 2540 lb Shear Strength, 2685/3100 lb Tensile Strength
3/8 x 2-1/4 WEDGE ANCHOR ZINC JAR
Share
Product#PECO 6410J
MPN 6410J
UPC705591964785
- Brand: PecoDiameter: 3/8 inDrill Size: 3/8 inFinish: Zinc PlatedMaterial: Carbon SteelMinimum Embedment Depth: 1-5/8 inOverall Length: 2-1/4 inSeries: Power-Stud+® SD1Shear Strength: 2540 lbTensile Strength: 2685/3100 lbThread Type: UNC
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow up expansion after setting under tensile loading
- 2685 lb at 3000 psi and 3100 lb at 4000 psi tensile strength for concrete
- The Power-Stud+® SD1 anchor is fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance is cracked and uncracked concrete. Suitable base materials include nominal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Peco Wedge Expansion Anchor, Series: Power-Stud+® SD1, 3/8 in Diameter, 2-1/4 in Overall Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, UNC Thread, 2540 lb Shear Strength, 2685/3100 lb Tensile Strength