POLYMER PEX COUPLING 1/2 BARB
Share
Product#ZPEX QQPC33X
MPN QQPC33X
UPC084169683977
Description
ZurnPEX® QickSert CR™ coupling. The QQPC_X coupling is used to connect PEX tubing to PEX tubing. Molded from Acudel®. These fittings, as a system with Zurn PEX® tube, are pressure rated at 160 PSI at 73 deg F, 100 PSI at 180 deg F, and 80 PSI at 200 deg F. These fittings are listed by NSF as complying with the following standards NSF/ANSI Standard 14, NSF/ANSI Standard 61, ASTM F877, and CSA B137.5, and ASTM F2159.
Zurn® ZURN PEX® QickSert CR™ Coupling, Fitting/Connector Type: Coupling, 1/2 in Nominal, Barb, 1-1/2 in Length, 160 psi, Method of Manufacture: Molded, Polymer, 200 deg F, 0.68 in OD
Zurn® ZURN PEX® QickSert CR™ Coupling, Fitting/Connector Type: Coupling, 1/2 in Nominal, Barb, 1-1/2 in Length, 160 psi, Method of Manufacture: Molded, Polymer, 200 deg F, 0.68 in OD
POLYMER PEX COUPLING 1/2 BARB
Share
Product#ZPEX QQPC33X
MPN QQPC33X
UPC084169683977
- Brand: Zurn®Dimensions: 0.68 in ODEnd Style: BarbFitting/Connector Type: CouplingLength: 1-1/2 inMaterial: PolymerMethod of Manufacture: MoldedNominal Size: 1/2 inPressure Rating: 160 psiTemperature Rating: 200 deg F
- Molded from highly engineered polymers
- ASTM F2159 specification for plastic insert fittings utilizing a copper crimp ring for SDR9 cross-linked polyethylene (PEX) tubing and SDR9 polyethylene of raised temperature (PE-RT) tubing
- ASTM F877 specification for crosslinked polyethylene (PEX) plastic hot and cold-water distribution systems
- ZurnPEX® QickSert CR™ coupling. The QQPC_X coupling is used to connect PEX tubing to PEX tubing. Molded from Acudel®. These fittings, as a system with Zurn PEX® tube, are pressure rated at 160 PSI at 73 deg F, 100 PSI at 180 deg F, and 80 PSI at 200 deg F. These fittings are listed by NSF as complying with the following standards NSF/ANSI Standard 14, NSF/ANSI Standard 61, ASTM F877, and CSA B137.5, and ASTM F2159.
Zurn® ZURN PEX® QickSert CR™ Coupling, Fitting/Connector Type: Coupling, 1/2 in Nominal, Barb, 1-1/2 in Length, 160 psi, Method of Manufacture: Molded, Polymer, 200 deg F, 0.68 in OD