D293 SEWAGE PUMP 1HP CI 230V AUTO 2 DI
Share
Product#ZOE 293-0003
MPN 293-0003
UPC053514019105
Description
Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller® cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, epoxy powder coated finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.
Zoeller® Submersible Sewage Pump, 1-Seal High-Head, Series: Waste-Mate 290, 122 gpm, 2 or 3 in FNPT Outlet, 51 ft Maximum Head, 1 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W Dimensions
Zoeller® Submersible Sewage Pump, 1-Seal High-Head, Series: Waste-Mate 290, 122 gpm, 2 or 3 in FNPT Outlet, 51 ft Maximum Head, 1 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W Dimensions
- Brand: Zoeller®Amperage Rating: 10.2 ABearing Type: BallCord Type: 3-Wire NeopreneDimensions: 19-5/16 in H x 12-7/8 in WFlow Rate: 122 gpmFrequency Rating: 60 HzHorsepower: 1 hpImpeller Type: Non-Clogging VortexMaterial: Cast IronMaximum Head: 51 ftMotor Speed: 3450 rpmOutlet Size: 2 or 3 in FNPTPhase: 1 phSeries: Waste-Mate 290Temperature Rating: 130 deg FType: 1-Seal High-HeadVoltage Rating: 230 VAC
- Durable, cast iron constructed switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- All cast iron class 30 30000 lb tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
- Shaft seal - stainless steel carbon and ceramic rotary
- 1117 carbon steel motor shaft (single seal models)
- Corrosion-resistant, powder coated epoxy finish
- Upper and lower ball bearing running in bath of oil
- Neoprene square ring and gasket
- All models pass 2 in spherical solids
- On point: 15-3/4 in, off point: 5-1/4 in
- 100% computerized tested
- 20 ft L cord
- Automatic operation
- Permanent split capacitor or 3 ph motor
- Class B insulation
- Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller® cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, epoxy powder coated finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.
Zoeller® Submersible Sewage Pump, 1-Seal High-Head, Series: Waste-Mate 290, 122 gpm, 2 or 3 in FNPT Outlet, 51 ft Maximum Head, 1 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W Dimensions