SS FLG BALL VLV FP RTFE 150# 1
Share
Product#SHRP 50116-01.00
MPN SV50116R010
UPC092201415226
Description
Sharpe® Ball Valve, Series: 50 Series, 1 in Nominal, Flanged, 150 lb, Full Port, Lever Operated Actuator, 316 Stainless Steel Ball, 5 in Inlet to Outlet Length, 3.8 in Top to Inlet Center, 316 Stainless Steel Body, 316 Stainless Steel Stem and RTFE Seat Trim, PTFE
SS FLG BALL VLV FP RTFE 150# 1
Share
Product#SHRP 50116-01.00
MPN SV50116R010
UPC092201415226
- Brand: Sharpe®Actuator Type: Lever OperatedBall Material: 316 Stainless SteelBody Material: 316 Stainless SteelEnd Style: FlangedInlet to Outlet Length: 5 inNominal Size: 1 inPort Type: FullPressure Class: 150 lbSeries: 50 SeriesSoftgoods Material: PTFETop to Inlet Center: 3.8 inTrim Material: 316 Stainless Steel Stem and RTFE Seat
- Blow-out proof stem is an internal entry stem is machined with a heavy shoulder to prevent blow-out
- Anti-static devices are included at two points on the valve stem to provide continuous ball-to-stem and stem-to-body grounding, to prevent build-up of static charge in the valve
- Stem seals are Live loaded using belleville washers to provide consistent sealing forces, reducing or eliminating the need for frequent seal adjustment
- Fully encapsulated body seals provides consistent and controlled loading of the body seal compression through a full metal-to-metal contact joint design, eliminating seal extrusion and potential body joint leakage
- Integral mounting pad ideal for actuation, ISO 5211 mounting dimensions simplify fit and alignment between valve, bracketry, and actuator, permits easy field conversion from manual operation to actuation
- Sharpe® series 50 ball valves are supplied with lever handles designed to permit locking the valve in either the open or closed position, sizes through 2 in are supplied with a latch engaged at open and closed positions to prevent inadvertent operation, larger sizes have a lockable pipe handle
- Relief slots are provided at the perimeter of the seats to equalize pressure in the body cavity with the upstream line when the valve is closed, preventing upstream seat extrusion and enhancing downstream seating performance
- Floating ball design - precision engineered and machined solid stainless steel ball with relief hole in the stem slot prevents build-up of cavity pressure while the valve is in the open position
- Body and end piece casting are marked with the heat codes providing traceability to the chemical analysis and material test reports performed at the foundry
- 94 Cv
- Locking lever handle
- Sharpe® Ball Valve, Series: 50 Series, 1 in Nominal, Flanged, 150 lb, Full Port, Lever Operated Actuator, 316 Stainless Steel Ball, 5 in Inlet to Outlet Length, 3.8 in Top to Inlet Center, 316 Stainless Steel Body, 316 Stainless Steel Stem and RTFE Seat Trim, PTFE