Product#MF 3M4
MPN 3M4
UPC622417100861
Description
Metal-Fab's round and oval Type-B vent is listed by Underwriters Laboratories for use with approved category 1 gas furnaces, heaters, and boilers. A category 1 appliance operates with a non-positive vent static pressure. The double wall design of B-vent enables the product to be used in homes and commercial buildings at close clearance to combustible. Metal-Fab's B-vent design incorporates features that make installation quick, easy, and safe.
METAL-FAB® Gas Vent Pipe, Type B Double Wall Round, Series: M Series, 3 in Dia, 4 ft Length, Aluminum, Domestic
METAL-FAB® Gas Vent Pipe, Type B Double Wall Round, Series: M Series, 3 in Dia, 4 ft Length, Aluminum, Domestic
- Brand: METAL-FAB®Diameter: 3 inDomestic/Import: DomesticLength: 4 ftMaterial: AluminumSeries: M SeriesType: Type B Double Wall Round
- Male end
- SureLock™ positive twist-lock
- Elimination of sharp edges by hemming the flue and casing
- Assembly and disassembly, without tools, using positive twist-lock
- 360 deg rotation of small dia fittings using swivel tees, wyes, and elbows
- Space savings inside standard stud walls using oval pipe
- The vent shall be of the double-wall, Factory built type for use with approved category I appliance burning natural or LP gas, which produce flue gases exhausted at temperatures not exceeding 550 deg F
- The vent shall be constructed of an outer wall of galvanized steel 0.018 in THK G-90 for sizes 3 to 14 in Dia and 0.024 in THK G-90 for sizes 16 to 30 in Dia
- The inner wall shall be constructed of aluminum alloy 0.012 in THK for sizes 3 to 8 in Dia and 0.018 in THK for sizes 10 to 30 in Dia
- The vent pipe shall incorporate a push-tab locking system to prevent disassembly of vent during or after installation
- Vent shall be tested and listed for a min clearance to combustibles of 1 in for sizes 3 to 24 in Dia and 2 in for sizes 26 to 30 in Dia
- Type B-Vent shall be installed in accordance with the vent manufacturer's installation instructions, UL listing and state or local codes
- Type B-Vent shall be warranted by the manufacturer against defects in material and workmanship for a period of one (1) year from the date of the original installation
- Air insulation
- Vent overlaps 1.5 in when joined together
- B-Vent products shall be listed to UL-441 and carry the appropriate UL or cUL listing mark or label
- Metal-Fab's round and oval Type-B vent is listed by Underwriters Laboratories for use with approved category 1 gas furnaces, heaters, and boilers. A category 1 appliance operates with a non-positive vent static pressure. The double wall design of B-vent enables the product to be used in homes and commercial buildings at close clearance to combustible. Metal-Fab's B-vent design incorporates features that make installation quick, easy, and safe.
METAL-FAB® Gas Vent Pipe, Type B Double Wall Round, Series: M Series, 3 in Dia, 4 ft Length, Aluminum, Domestic