Product#HYD SHEF30A1 20
MPN SHEF30A1 20
Description
Automatic operation features easily adjustable, wide-angle float switch with a piggyback plug-in arrangement that allows for simple conversion to manual operation. Special inlet design allows pump to handle 3/4 in solids. Cast iron body and an oil-filled motor provide superior cooling characteristics for longer pump life. Motor windings contain automatic thermal overload protection. Energy efficient.
HYDROMATIC® Submersible Effluent Pump, High-Head Automatic, Series: SHEF, 35 gpm, 1-1/2 in NPT Outlet, 10 ft Maximum Head, 1/3 hp, 115 VAC, 8 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, SJTW Cord, 1 Service Factor, Vortex Impeller, 120 deg F, NEMA A Enclosure, Sleeve/Ball Bearing, Cast Iron, 11-7/8 in OAH Dimensions
HYDROMATIC® Submersible Effluent Pump, High-Head Automatic, Series: SHEF, 35 gpm, 1-1/2 in NPT Outlet, 10 ft Maximum Head, 1/3 hp, 115 VAC, 8 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, SJTW Cord, 1 Service Factor, Vortex Impeller, 120 deg F, NEMA A Enclosure, Sleeve/Ball Bearing, Cast Iron, 11-7/8 in OAH Dimensions
- Brand: HYDROMATIC®Amperage Rating: 8 ABearing Type: Sleeve/BallCord Type: SJTWDimensions: 11-7/8 in OAHEnclosure Type: NEMA AFlow Rate: 35 gpmFrequency Rating: 60 HzHorsepower: 1/3 hpImpeller Type: VortexMaterial: Cast IronMaximum Head: 10 ftMotor Speed: 1550 rpmOutlet Size: 1-1/2 in NPTPhase: 1 phSeries: SHEFService Factor: 1Temperature Rating: 120 deg FType: High-Head AutomaticVoltage Rating: 115 VAC
- Carbon ceramic mechanical shaft seal
- Oil filled motor with automatic reset thermal overload for maximum protection
- Engineered thermoplastic impeller
- (4) shaded pole motor
- Dielectric lubricating oil
- 18/3, SJTW, 20 ft standard power cord
- Stainless steel handle, fasteners, shaft
- Cast iron sleeve upper bearing/single row ball lower bearing
- Automatic operation features easily adjustable, wide-angle float switch with a piggyback plug-in arrangement that allows for simple conversion to manual operation. Special inlet design allows pump to handle 3/4 in solids. Cast iron body and an oil-filled motor provide superior cooling characteristics for longer pump life. Motor windings contain automatic thermal overload protection. Energy efficient.
HYDROMATIC® Submersible Effluent Pump, High-Head Automatic, Series: SHEF, 35 gpm, 1-1/2 in NPT Outlet, 10 ft Maximum Head, 1/3 hp, 115 VAC, 8 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, SJTW Cord, 1 Service Factor, Vortex Impeller, 120 deg F, NEMA A Enclosure, Sleeve/Ball Bearing, Cast Iron, 11-7/8 in OAH Dimensions