Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks. The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing. The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump. The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.
Grundfos Submersible Drainage Pump, 1-Stage, Series: UNILIFT KP250-A-1, 30.9 gpm, 1-1/4 in NPT Outlet, 26.25 ft Maximum Head, 115 VAC, 4.9 A, 60 Hz, 1 ph, 2900 rpm Motor, 304 Stainless Steel Semi-Open Impeller, Freestanding Mount, IP68, Water Lubricated Bearing, 304 Stainless Steel