HOSE MENDER ZP 2-IN
Share
Product#DIXV DM26
MPN DM26
Description
Dixon® Hose Mender, Fitting/Connector Type: Coupling, 2 in Nominal, Hose Shank End Style, 4-9/16 in Length, Steel, Zinc Plated, 2 in Dia, Domestic
HOSE MENDER ZP 2-IN
Share
Product#DIXV DM26
MPN DM26
- Brand: Dixon®Dimensions: 2 in DiaDomestic/Import: DomesticEnd Style: Hose ShankFinish: Zinc PlatedFitting/Connector Type: CouplingLength: 4-9/16 inMaterial: SteelNominal Size: 2 in
- Hose mender for repairing hoses
- Connects to a hose on both ends
- Zinc plated steel for greater corrosion resistance than unplated steel
- Barbed fitting for a tight seal on hoses
- Not for compressible products such as air, nitrogen, or steam
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
- Dixon® Hose Mender, Fitting/Connector Type: Coupling, 2 in Nominal, Hose Shank End Style, 4-9/16 in Length, Steel, Zinc Plated, 2 in Dia, Domestic