CAST STL FLG GATE VLV CL150 OS&Y 2 in
Share
Product#CRAV 47XUF-02.00
MPN 47XUF-2
Description
CRANE® cast steel gate valves offer the ultimate in dependable service for steam, air, gas, oil, oil vapor, and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion, and resistance to flow. They are available in a wide variety of trims.
CRANE® Gate Valve, Series: 47 Series, 2 in Nominal, Flanged End Style, 285 psi Pressure, 150 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 7 in Inlet to Outlet Length, 17 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 8 in Diameter Hand Wheel
CRANE® Gate Valve, Series: 47 Series, 2 in Nominal, Flanged End Style, 285 psi Pressure, 150 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 7 in Inlet to Outlet Length, 17 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 8 in Diameter Hand Wheel
CAST STL FLG GATE VLV CL150 OS&Y 2 in
Share
Product#CRAV 47XUF-02.00
MPN 47XUF-2
- Brand: CRANE®Actuator Type: HandwheelBody Material: Cast SteelEnd Style: FlangedHand Wheel Diameter: 8 inInlet to Outlet Length: 7 inNominal Size: 2 inPressure Class: 150 lbPressure Rating: 285 psiSeries: 47 SeriesSoftgoods Material: Graphite PackingTemperature Rating: -20 to 100 deg FTop to Inlet Center: 17 inTrim Material: 410 Stainless Steel
- Outside screw and yoke
- Flexible wedge disc
- All seat ring are seal welded as standard
- Quality process fully documented, material fully traceable
- Full range of special trims and option available
- Standard construction: wcb-trim 8, other option are available
- Crane recommends the use of manual or powered gear assistance for size 8 in and larger
- F6/Hard faced nominal trim
- 13 Cr ASTM A217 (CA 215) CoCra seating surface
- CRANE® cast steel gate valves offer the ultimate in dependable service for steam, air, gas, oil, oil vapor, and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion, and resistance to flow. They are available in a wide variety of trims.
CRANE® Gate Valve, Series: 47 Series, 2 in Nominal, Flanged End Style, 285 psi Pressure, 150 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 7 in Inlet to Outlet Length, 17 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 8 in Diameter Hand Wheel