Call Us  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Pumps Sewage & Wastewater Pumps Sewage Pumps E293 SEWAGE PUMP 1HP CI 230V NON-AUTO 2 DI

E293 SEWAGE PUMP 1HP CI 230V NON-AUTO 2 DI

PART ZOE 293-0004
SUPPLIER Zoeller®
SUPPLIER PART # 293-0004
Calculating price...
QUANTITY

About this item

Zoeller® Submersible Sewage Pump, 1-Seal High-Head, Series: Waste-Mate 290, 122 gpm, 2 or 3 in FNPT Outlet, 51 ft Maximum Head, 1 hp, 230 V AC, 10.2 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W Dimensions

The 1 HP Model E293 nonautomatic Sewage Pump is designed to remove raw sewage, effluent or ground water in sewage or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

cCSAus Certified|SSPMA Certified|UL Listed
Amperage Rating 10.2 A
Bearing Type Ball
Cord Type 3-Wire Neoprene
Dimensions 19-5/16 in H x 12-7/8 in W
Flow Rate 122 gpm
Frequency Rating 60 Hz
Horsepower 1 hp
Impeller Type Non-Clogging Vortex
Material Cast Iron
Maximum Head 51 ft
Motor Speed 3450 rpm
Outlet Size 2 or 3 in FNPT
Phase 1
Series Waste-Mate 290
Temperature Rating 130 deg F
Type 1-Seal High-Head
Voltage Rating 230 V AC
Brand Zoeller®
Country of Origin US
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • No sheet metal parts to rust or corrode
  • All cast iron class 30 30000 lb tensile strength
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Oil filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
  • Shaft seal - stainless steel carbon and ceramic rotary
  • 1117 carbon steel motor shaft (single seal models)
  • Corrosion-resistant, powder coated epoxy finish
  • Upper and lower ball bearing running in bath of oil
  • Neoprene square ring and gasket
  • All models pass 2 in spherical solids
  • 100% computerized tested
  • 20 ft L cord
  • Non automatic operation
  • Permanent split capacitor or 3 ph motor
  • Class B insulation