1/2 x 3-3/4 WEDGE ANCHOR ZINC JAR

PART PECO 6422J

SUPPLIER Peco

SUPPLIER PART # 6422J

Calculating price...

QUANTITY

About this item

Peco Wedge Expansion Anchor, Series: Power-Stud+® SD1, 1/2 in Diameter, 3-3/4 in Overall Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, UNC Thread, 4195 lb Shear Strength, 4155/4800 lb Tensile Strength

The Power-Stud+® SD1 anchor is fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance is cracked and uncracked concrete. Suitable base materials include nominal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

ICC-ES ESR-2818 2012 IBC/IRC|ICC-ES ESR-2818 2009 IBC/IRC|ICC-ES ESR-2818 2006 IBC/IRC|ICC-ES ESR-2966 2012 IBC/IRC|ICC-ES ESR-2966 2009 IBC/IRC|ICC-ES ESR-2966 2006 IBC/IRC|ICC-ES AC193|ACI 355.2|ACI 318|ICC-ES AC01|UL File No. EX1289|ASTM A563 Grade A|ASTM F844|ANSI B18.22.2 Type A|ANSI B633 SC1 Type III

Diameter 1/2 in

Drill Size 1/2 in

Finish Zinc Plated

Material Carbon Steel

Minimum Embedment Depth 2-1/4 in

Overall Length 3-3/4 in

Series Power-Stud+® SD1

Shear Strength 4195 lb

Tensile Strength 4155/4800 lb

Thread Type UNC

Brand Peco

Consistent performance in high and low strength concrete

Nominal drill bit size is the same as the anchor diameter

Anchor can be installed through standard fixture holes

Length ID code and identifying marking stamped on head of each anchor

Anchor design allows for follow up expansion after setting under tensile loading

4155 lb at 3000 psi and 4800 lb at 4000 psi tensile strength for concrete

Specification Sheet

1/2 x 3-3/4 WEDGE ANCHOR ZINC JAR

About this item

Related Products

Recently Viewed Products