(615)-255-4810  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Water Heaters Residential Residential Electric Tank Water Heaters 28 ELEC W/H LOWBOY 240V 4.5KW H=29.875 D=22

28 ELEC W/H LOWBOY 240V 4.5KW H=29.875 D=22

PART BWC RE230L6
SUPPLIER Bradford White®
SUPPLIER PART # RE230L6-1NCWW
Calculating price...
QUANTITY

About this item

Bradford White® Electric Water Heater, Lowboy, Series: RE230L6, 28 gal Tank, 208 VAC, 4.5 kW Power, 1 ph, 3/4 in NPT Water Connection, Screw-In Copper Heating Element, 0.92 Energy Factor, 21 gph Recovery Rate, 150 psi Pressure, ASME Yes/No: No, Steel, 22 in Dia x 31.023 in H Dimensions, Domestic

Residential Electric models, with their varied configurations, fit just about any location. Built for tight spaces with low headroom, Lowboy models allow you flexibility to put electric water heating where a conventional upright tank will not fit. Bradford White offers models with and without insulation blankets.

AHRI Certified|CEC Listed|CSA Certified|ETL Listed|Massachusetts Approved|NSF 372|UL 1453|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
ASME Yes/No No
Dimensions 22 in Dia x 31.023 in H
Domestic/Import Domestic
Energy Factor 0.92
Heating Element Screw-In Copper
Material Steel
Phase 1
Power Rating 4.5 kW
Pressure Rating 150 psi
Recovery Rate 21 gph
Series RE230L6
Tank Capacity 28 gal
Type Lowboy
Voltage Rating 208 VAC
Water Connection 3/4 in NPT
Brand Bradford White®
Country of Origin US
Warranty 6 Years Limited on Tank/6 Years Limited on Component Parts
  • Low restriction brass drain valve: Durable tamper proof design
  • Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
  • Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water
  • Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
  • Vitraglas® lining
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity and blanketed models additionally use a supplied flexible fiberglass insulation blanket
  • Water connections: 3/4 in NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
  • Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
  • Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
  • Non-simultaneous operation: Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory