Product#VIC V014786CBV
MPN V014786CBV
UPC688304123726
Description
Tour and Anderson calibrated balancing valves offer a reliable, simple and cost effective way to measure and balance all flow rates. Full throttling range is achieved by 4, 8, 12, 16, 20 or 22 full turns of the handwheel, enabling a precise setting. This high degree of accurate adjustment means that the system can be balanced precisely. The actual pressure drops in heating and cooling systems are difficult to establish by calculation because water flows vary from design flows. They can be corrected easily by regulating the desired water flow with Tour & Anderson globe style balancing valves. By measuring the pressure drop across measuring ports at a particular handwheel setting, the water flow for the valve size can be read easily from the appropriate pressure drop graph or flow balancing wheel. If the flow does not conform with that specified, adjust the valve and repeat the measuring procedure until the correct flow has been obtained.
Victaulic® Balancing Valve, Series: 786, 1-1/2 in Nominal, Solder End Style, 300 psi Pressure, -4 to 250 deg F, 66 gpm Flow Rate, Media: Water, Handwheel Actuator, 5.13 in Inlet to Outlet Length, 4-3/4 in Top to Inlet Center, AMETAL® Body, Metal Trim, EPDM Seat, Seal Softgoods, 1.9 in OD Dimensions
Victaulic® Balancing Valve, Series: 786, 1-1/2 in Nominal, Solder End Style, 300 psi Pressure, -4 to 250 deg F, 66 gpm Flow Rate, Media: Water, Handwheel Actuator, 5.13 in Inlet to Outlet Length, 4-3/4 in Top to Inlet Center, AMETAL® Body, Metal Trim, EPDM Seat, Seal Softgoods, 1.9 in OD Dimensions
- Brand: Victaulic®Actuator Type: HandwheelBody Material: AMETAL®Dimensions: 1.9 in ODEnd Style: SolderFlow Rate: 66 gpmInlet to Outlet Length: 5.13 inMedia: WaterNominal Size: 1-1/2 inPressure Rating: 300 psiSeries: 786Softgoods Material: EPDM Seat, SealTemperature Rating: -4 to 250 deg FTop to Inlet Center: 4-3/4 inTrim Material: Metal
- Body - Ametal (pressure die cast, nonporous copper alloy)
- All Tour and Anderson balancing valves include a concealed memory feature with a locking tamperproof setting
- Insulation kits are available for 1/2 to 6 in sizes for series 786 balancing valves
- Red polyamide plastic handwheel
- Ametal seat, EPDM seat seal/stem seals/probe seals
- Tour and Anderson calibrated balancing valves offer a reliable, simple and cost effective way to measure and balance all flow rates. Full throttling range is achieved by 4, 8, 12, 16, 20 or 22 full turns of the handwheel, enabling a precise setting. This high degree of accurate adjustment means that the system can be balanced precisely. The actual pressure drops in heating and cooling systems are difficult to establish by calculation because water flows vary from design flows. They can be corrected easily by regulating the desired water flow with Tour & Anderson globe style balancing valves. By measuring the pressure drop across measuring ports at a particular handwheel setting, the water flow for the valve size can be read easily from the appropriate pressure drop graph or flow balancing wheel. If the flow does not conform with that specified, adjust the valve and repeat the measuring procedure until the correct flow has been obtained.
Victaulic® Balancing Valve, Series: 786, 1-1/2 in Nominal, Solder End Style, 300 psi Pressure, -4 to 250 deg F, 66 gpm Flow Rate, Media: Water, Handwheel Actuator, 5.13 in Inlet to Outlet Length, 4-3/4 in Top to Inlet Center, AMETAL® Body, Metal Trim, EPDM Seat, Seal Softgoods, 1.9 in OD Dimensions