1-1/2 RUBBER TEST CAP
Share
Product#FER QC-101
MPN QC-101
UPC018578016583
Description
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, their durability causes them to be suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lbs. of torque. Remember to hand tighten when installing on corrugated pipe.
Fernco® Qwik Cap, Series: QC Series, Fitting/Connector Type: Cap, 1-1/2 in Nominal, 0.965 in Length, PVC, -30 to 180 deg F, 2.269 in, Domestic
Fernco® Qwik Cap, Series: QC Series, Fitting/Connector Type: Cap, 1-1/2 in Nominal, 0.965 in Length, PVC, -30 to 180 deg F, 2.269 in, Domestic
1-1/2 RUBBER TEST CAP
Share
Product#FER QC-101
MPN QC-101
UPC018578016583
- Brand: Fernco®Dimensions: 2.269 inDomestic/Import: DomesticFitting/Connector Type: CapLength: 0.965 inMaterial: PVCNominal Size: 1-1/2 inSeries: QC SeriesTemperature Rating: -30 to 180 deg F
- Fast, easy installation
- Permanent or temporary cap
- Suitable for above or below ground use as an permanent solution to cap pipe ends, test pipes and cleanouts
- Low cost and reusable
- Convex face minimizes ballooning
- Flexible PVC gasket complying to ASTM D 5926
- 300 series stainless steel clamp
- 60 in lb installation torque
- Flexible PVC 60 duro shore a
- 4.3 psi tested pressure
- Fits 1-1/2 in plastic, 1-1/2 in cast iron, 1-1/2 in copper, 1-1/2 in steel
- Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, their durability causes them to be suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lbs. of torque. Remember to hand tighten when installing on corrugated pipe.
Fernco® Qwik Cap, Series: QC Series, Fitting/Connector Type: Cap, 1-1/2 in Nominal, 0.965 in Length, PVC, -30 to 180 deg F, 2.269 in, Domestic